SPORTLUFTFILTER
The panel / cylindrical air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).
Air flow chart for a sample BMC air filter against an OEM paper filter
Temperature 25C° - Humidity 25% - Pressure 1020mbar
Test ran with oem airbox, and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
For any other info, please see the FAQ page.
-
SAAB
9-5 I (YS3E) 2.0 PS
185Jahr
00 > 09Motor
YS3E9-5 I (YS3E) 2.0 T PS
150Jahr
97 > 09Motor
YS3E9-5 I (YS3E) 2.0 T Bbiopower PS
180Jahr
05 > 09Motor
YS3E9-5 I (YS3E) 2.2 TiD PS
120Jahr
02 > 03Motor
YS3E9-5 I (YS3E) 2.3 T PS
170Jahr
97 > 01Motor
YS3E9-5 I (YS3E) 2.3 T PS
185Jahr
01 > 09Motor
YS3E9-5 I (YS3E) 2.3 T PS
220Jahr
03 > 05Motor
YS3E9-5 I (YS3E) 2.3 T Biopower PS
210Jahr
05 > 09Motor
YS3E9-5 I (YS3E) 2.3 T S Aero PS
230Jahr
99 > 01Motor
YS3E9-5 I (YS3E) 2.3 T S Aero PS
250Jahr
02 > 05Motor
YS3E9-5 I (YS3E) 2.3 T S Aero PS
260Jahr
06 > 09Motor
YS3E9-5 I (YS3E) 3.0 T SE V6 PS
200Jahr
97 > 03Motor
YS3E9-5 I (YS3E) 3.0 TiD PS
177Jahr
01 > 03Motor
YS3E