|Outside Width/Base Inner Diameter (mm)||
|Outside Length/Base Outside Diameter (mm)||
The panel / cylindrical air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).
This chart has a pure illustrative purpose and does not refer to the present filter.
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
For any other info, please see the FAQ page.
|Q7 (4M) 2.0 TFSI 252||252||-||2015 >|
|Q7 (4M) 3.0 TDI 272||272||-||2015 >|
|Q7 (4M) 3.0 TDI 249||249||-||2015 >|
|Q7 (4M) 3.0 TDI 218||218||-||2015 >|
|Q7 (4M) 3.0 TDI 45 Mild Hybrid 231||231||-||2018 >|
|Q7 (4M) 3.0 TDI 50 Mild Hybrid 286||286||-||2018 >|
|Q7 (4M) 3.0 TDI E-Tron 258||258||-||2015 >|
|Q7 (4M) 3.0 TFSI 333||333||-||2015 >|
|Q8 (4M) 3.0 TDI 249||249||-||2018 >|
|Q8 (4M) 3.0 TDI 45 231||231||-||2018 >|
|Q8 (4M) 3.0 TDI 50 286||286||-||2018 >|
|TOUAREG III 2.0 TSI 249||249||-||2018 >|
|TOUAREG III 2.0 TSI 245||245||-||2018 >|
|TOUAREG III 2.0 TSI 252||252||-||2018 >|
|TOUAREG III 3.0 TDI 249||249||-||2018 >|
|TOUAREG III 3.0 TDI 286||286||-||2018 >|
|TOUAREG III 3.0 TDI 231||231||-||2018 >|
|TOUAREG III 3.0 TDI 258||258||-||2018 >|