Bmc air filters: car and bike filter - conical filter - replacement air filter

CONICAL FILTER
BMC conical filters let you remove the original air box and provide long life, better performance and easiness to replace. These filters are available in the following versions: Single Air (SA) with a simple lateral airflow; Twin Air (TW) with lateral and central airflow.BMC direct induction filters can be fitted on every kind of car. If necessary, BMC is able to supply tubes and rubber connectors to make up a complete kit. For some particular applications, an alloy flexible tube is available to duct cold air to the conical filter. In fact, colder aspirated air means you have a bigger volumetric mass. A greater mass of air gives better combustion and finally, increased performance.

VENTURI ADMISSION SYSTEM

Our new VAS admission system, composed of a steel tunnel and a conical twin air, uses the Venturi effect to improve induction by increasing the incoming air speed. It is available in different sizes and official Teams in GT competitions use it.

BIKE FILTER

Following the F.1 successes and the very good performance obtained by the Team Yamaha Belgarda and Team Suzuki Alstare Corona in the World SuperSport Championship, BMC air filters have proved to be the leading product in the category for its quality in material and construction. BMC air filters have been used in Race in the worst conditions to test performance and reliability. Current production uses the same materials already tested. BMC air filters range includes all the more popular sport street bikes, and it always increases including all the new models.
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. BMC air filters, made in cotton, minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore, the benefits of replacing the original paper filter with a BMC cotton air filter in your motorcycles are evident.

REPLACEMENT FILTER

BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

CARBON DYNAMIC AIRBOX
CDA filtering system is composed of a cylindrical carbon air box containing a washable filtering element. Substituting the original air box with our CDA, cold air is directly channelled through an internal airflow deflector to the filter and drawn into the engine with a very small pressure drop (patented system). The CDA system also includes a black alloy ducting (60 cm length) for connecting the system to an air intake on the front of the car. The system is available in two different dimensions: we advise Type 1 for engines up to 1,600 cc; Type 2 for bigger displacements. Every type is also available in different diameters on engine side for connections. Dyno and Datron Laser tests demonstrate the great performance of CDA filtering system